J & A International Limited J & A International Limited
Heatpress settings by product

Disclaimer: Modern garments are coated and finished in many different ways. We recommend testing the best combination of heatseal parameters before applying the decoration.
J&A (International) Ltd accept no liability for incorrectly applied decoration. E&OE
Please contact us if you require any further assistance.

Download Transfers Heatseal Parameters in Excel format

Download Badges and Tape Heatseal Parameters in Excel format

  PRODUCT INTERPLATEN TEMP. DWELL TIME (Secs) INTERPLATEN PRESSURE PAPER RELEASE
CLEAN ROOM 200°C
392°F		 35 Medium Hot
ENDURA 200°C
392°F		 15-20 High Cold
FLOCK 165°C
329°F		 10 Medium Cold
FR TRANS 200°C
392°F		 15-20 High Cold
GLITTER TRANS 160-180°C
320-356°F		 10 High Cold
RADIANCE 140-180°C
284-356°F		 12-18 Low Cold
SILVER REFLECTIVE 160-180°C
320-356°F		 10-12 Medium/Low Hot
TRADEMARK 210°C
410°F		 7-10 High Hot
TRIMAX
NB - Trimax Names are Cold Peel		 140-180°C
284-356°F		 10 Medium/Low Warm
TRIMAX PLUS 140-180°C
284-356°F		 10 Medium/Low Cold
TRIMAX GLOSS 140-180°C
284-356°F		 10 High Cold
KOLORMAX 160-180°C
325-356°F		 10 - 12 Medium/Firm Cold
ENDURA KOLORMAX 180°C

 10 Medium/Firm Cold
PRO-FLEX 160°C
320°F		 10 Medium/Low Warm
PRO-FLEX PLUS 160°C
320°F		 10 Medium/Low Cold
HOLOFOIL 140-180°C
284-356°F		 10 Medium/Low Cold
CLASSIC 210°C
410°F		 15-18 High N/A
OPTIMA 210°C
410°F		 12-15 High N/A
RADIANCE 140-180°C
284-356°F		 12-18 Low N/A
SECURITY POCKET 210°C
410°F		 15-20 High Cold
SILVER REFLECTIVE
NB -For Industrial Wash badges (RL) remove carrier before application		 160-180°C
320-356°F		 10-12 Medium/Low N/A
HOT STITCH - Apply heat to reverse of badge 210°C
410°F		 20 Firm N/A
IDENTA 210°C
410°F		 12 Medium N/A
PREMIER 210°C
410°F		 12 Medium N/A
PRIMA 210°C
410°F		 12 Medium N/A
  psi BAR kgf / cm² Pascals
  LOW PRESSURE 8 - 11 0.54 - 0.75 0.56 - 0.77 55000 - 76000
MEDIUM PRESSURE 12 - 16 0.82 - 1.09 0.84 - 1.12 83000 - 110000
HIGH PRESSURE over 17 over 1.16 over 1.20 over 117000
Where Medium / Low Pressure is stated this is fabric dependant.
Stated pressure is between platens not input pressure.

Disclaimer: Modern garments are coated and finished in many different ways. We recommend testing the best combination of heatseal parameters before applying the decoration. J&A (International) Ltd accept no liability for incorrectly applied decoration.